RAPCO 911 / 37038 Flat Camo Black Spray Paint Single Can

RAPCO 911 Flat Black is a premium, ultra-durable military-grade single-stage air-dry alkyd enamel. Formulated by Gillespie Coatings, this specialized tactical coating is designed for historical vehicle restoration, military equipment maintenance, and field-grade gear concealment. It provides a much richer, truer flat black finish than standard over-the-counter retail spray paints.

🎨 Product Applications & Color Profile

• Military Specification Matching: Accurately matched to Federal Standard (FS) color code 37038

Tactical Camouflage: Serving as a primary component for official military camouflage layouts, it is the exact flat black required for MERDC and Post-Vietnam / Current NATO 3-color and 4-color tactical vehicle patterns

C.A.R.C. Substitute: Functions as a safe, highly durable substitute for toxic Chemical Agent Resistant Coatings (CARC).

• Multi-Surface Compatibility: Specially engineered to maximize adhesion on steel, aluminum, and various heavy-duty synthetic/plastic materials.

🛠️ Technical Specifications & Performance

💡 Step-by-Step Application Guide

1. Surface Preparation

• Thoroughly degrease your workspace and the application surface.
• Wipe down metal surfaces completely using 70% isopropyl rubbing alcohol to clear away hidden body oils, grease, and carbon buildup.
• Note: For absolute maximum corrosion resistance and finish consistency on bare metals, always apply an initial coat of RAPCO military primer.

2. Shaking & Priming the Can

• Alkyd paint contains high levels of flattening agents that settle quickly.
• Aerosol cans must be shaken vigorously for 2 to 3 minutesimmediately after you hear the internal mixing ball begin to rattle

3. Spraying Technique

• Do not panic during application: RAPCO paint naturally applies heavy and glossy at first.
• Allow the formula to sit. It takes roughly 24 to 48 hours for the binders to fully level, flatten out, and drop into its true matte finish.
• Wait 1 to 2 hours between coats until the surface is completely dry to the touch. If it feels sticky or tacky, grant it more time.

4. Curing Timeline

• 24 Hours: Safe for basic handling or carefully peeling off camo stencils.
• 1 Week: Full chemical cure. Wait a full 7 days before applying gun oils, heavy lubricants, or subjecting the surface to rough field wear.