Federal Military Parts (763) 310-9340
Wilwood High-Performance Brake Rotor (NSN 2530-01-567-0893, AM General 6034965) for Military HMMWV
bihayê Regular
$157.95 USD
bihayê Regular
Bihayê firotanê
$157.95 USD
Buhayê yekîneyê
her
Shipping di qaseyê de tê hesibandin.
Berdestbûna hilgirtinê nekarî bar bike
Product Description
Upgrade your stopping power with this premium Wilwood High-Performance Brake Rotor. Specifically engineered as a direct tactical upgrade for late-tier military variants, this heavy-duty brake rotor delivers the extreme thermal management and high-torque reliability required for up-armored platforms and special forces packages.
This military HMMWV brake component features a distinctly thicker performance steel face and heavy-wall dual-vented cast iron construction, allowing it to withstand extreme operational heat loads far better than legacy systems. Mapped explicitly to modern high-clearance mounting points, this rotor is an essential element of the premium Wilwood multi-piston caliper setup retrofit. If your tactical vehicle has been modernized or upfitted to handle severe duty cycles, this specialized component provides the superior clamping interface and fade resistance your braking system demands.
Vehicle Compatibility & Fitment:
This high-performance brake rotor is explicitly provisioned for 12K Expanded Capacity Vehicle (ECV) and Reliability Enhanced Vehicle (REV) models retrofitted with the Wilwood multi-piston brake kit. It fits the following military Humvee platform model numbers:
This high-performance brake rotor is explicitly provisioned for 12K Expanded Capacity Vehicle (ECV) and Reliability Enhanced Vehicle (REV) models retrofitted with the Wilwood multi-piston brake kit. It fits the following military Humvee platform model numbers:
- M1113 (Expanded Capacity Vehicle / ECV Chassis)
- M1114 (Up-Armored Armament Carrier)
- M1151 / M1151A1 (Enhanced Armament Carrier)
- M1152 / M1152A1 (Enhanced Cargo/Troop Carrier)
- M1165 / M1165A1 (Command and Control Carrier)
- M1167 (TOW Missile Carrier)
Cross-Reference Part Numbers:
- National Stock Number (NSN): 2530-01-567-0893
- Wilwood Part Number: Z-160-9535-PS (Base Item: 160-9535)
- AM General Part Number: 6034965
🛠️ How Do I Know When I Need to Replace This Item?
You should inspect and replace your Wilwood High-Performance Brake Rotor if you notice any of the following signs:
- Thickness Below Minimum Specification: Use a micrometer to measure the rotor face. If the thickness drops below the manufacturer's wear limit (typically discarded if it wears down by more than 0.030 to 0.040 inches from its original 0.95-inch profile), it must be replaced.
- Deep Heat Checking or Cracking: While small surface hairline cracks (heat checks) are common under severe braking, any crack that extends to the outer edge of the rotor or connects between cooling vents is a critical safety hazard.
- Severe Grooving or Scoring: Deep grooves cut into the steel face by worn-out brake pads or trapped debris will reduce pad contact area and severely compromise stopping power.
- Pedal Pulsation or Shudder: A noticeable vibration or pulsation through the brake pedal during application indicates warping or uneven pad material deposition across the rotor face.
- Persistent Brake Fade or Discoloration: A dark blue or black tint across the friction face indicates the rotor has suffered catastrophic overheating, which alters the metallurgy of the iron and reduces braking efficiency.
